Mic Flags

Specialised Systems

Mic Flags

Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycotes Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

8 Products

  1. Rycote Single Square Black Mic Flag RYC107301
    RYC107301 Single Square Black Mic Flag
    Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

    Fits A Wide Range Of Microphones
    With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

    Lightweight But Tough
    Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

    If you want your branding seen on screen, use Rycote’s Mic Flags!
  2. Rycote Triangular Black Mic Flag RYC107302
    RYC107302 Triangular Black Mic Flag
    Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

    Fits A Wide Range Of Microphones
    With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

    Lightweight But Tough
    Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

    If you want your branding seen on screen, use Rycote’s Mic Flags!
  3. Rycote Single Square White Mic Flag RYC107307
    RYC107307 Single Square White Mic Flag
    Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

    Fits A Wide Range Of Microphones
    With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

    Lightweight But Tough
    Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

    If you want your branding seen on screen, use Rycote’s Mic Flags!
  4. Rycote Single Triangular White Mic Flag RYC107308
    RYC107308 Single Triangular White Mic Flag
    Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

    Fits A Wide Range Of Microphones
    With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

    Lightweight But Tough
    Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

    If you want your branding seen on screen, use Rycote’s Mic Flags!
  5. Rycote 20 x Single Square Black Mic Flag RYC107314
    RYC107314 20 x Single Square Black Mic Flag
    Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

    Fits A Wide Range Of Microphones
    With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

    Lightweight But Tough
    Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

    If you want your branding seen on screen, use Rycote’s Mic Flags!
  6. Rycote 20 x  Single Triangular Black Mic Flag RYC107315
    RYC107315 20 x Single Triangular Black Mic Flag
    Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

    Fits A Wide Range Of Microphones
    With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

    Lightweight But Tough
    Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

    If you want your branding seen on screen, use Rycote’s Mic Flags!
  7. Rycote 20 x Single Square White Mic Flag RYC107316
    RYC107316 20 x Single Square White Mic Flag
    Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

    Fits A Wide Range Of Microphones
    With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

    Lightweight But Tough
    Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

    If you want your branding seen on screen, use Rycote’s Mic Flags!
  8. Rycote 20 x Single Triangular White Mic Flag RYC107317
    RYC107317 20 x Single Triangular White Mic Flag
    Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

    Fits A Wide Range Of Microphones
    With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

    Lightweight But Tough
    Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

    If you want your branding seen on screen, use Rycote’s Mic Flags!