Crisp & intelligible pickup-far away or up close. This cardioid condenser is engineered to pick up dialogue and sound effects at a distance, while bypassing ambient noise such as traffic, air-handling systems, room reverberation and mechanically coupled vibrations. Designed especially for use with video cameras. 3.5 mm connector plugs into your video camera
The Sanken CMS-9 is a lightweight MS stereo condenser microphone ideal for all studio and field recording applications. It outputs L-R stereo signals, connects directly to a field recorder, and mounts to any standard 19mm diameter handgrip. Two capsules are incorporated into the CMS-9: a mid-mic with a unidirectional cardioid polar pattern, and a coincidentally mounted side-mic with a figure-of-8 pattern.
Long shotgun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch resistant finish. Length shown is for head only.
A short-shotgun capsule for use with various K-series power modules - measurements given with the K3U. [The K3U (XLR) or K3N (Tuchel) powering module had balanced output, the K1 unbalanced, and the K30AV was a transformerless o/p with multipin connector and non-standard powering.]
An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output and switchable pre-attenuation, bass roll-off and treble lift. The low-impedance capsule design makes it virtually immune to high humidity and condensation.
A transformerless RF condenser microphone with a very narrow response pattern. Below 500Hz the pattern is hypercardioid, becoming more club-shaped with increasing frequency. The low-impedance capsule design makes it virtually immune to high humidity and condensation. It also exists as the MKH816P48U-3 which is 48V phantom powered (2mA) and has a Max SPL of 128dB. Although no longer available it is still widely revered for news and location work.
Compact and lightweight, with wide aperture and excellent off-axis rejection, the VP82 is the affordable and reliable choice for camera-mounted A / V media production applications. For use in sound capture and sound reinforcement.
The VP89 is a professional shotgun condenser microphone for use in critical broadcast and media production applications. Designed with interchangeable long, medium, and short capsules, the VP89 models provide scalable, superior off-axis rejection for focus and flexibility in a wide variety of on-site locations.
The VP89 is a professional shotgun condenser microphone for use in critical broadcast and media production applications. Designed with interchangeable long, medium, and short capsules, the VP89 models provide scalable, superior off-axis rejection for focus and flexibility in a wide variety of on-site locations.
The VP89 is a professional shotgun condenser microphone for use in critical broadcast and media production applications. Designed with interchangeable long, medium, and short capsules, the VP89 models provide scalable, superior off-axis rejection for focus and flexibility in a wide variety of on-site locations.
A supercardioid short rifle electret condenser microphone. It has a low-cut filter to reduce ambient noise. It is suitable for mounting on Sony cameras and camcorders.